I WISH ~ COLLECTION CONTINUED

NUGGET PURSE

INSTRUCTIONS~

Cut Card Stock to 5" x 1-1/2"

Score at 1-1/2", 2-1/4"& 4".

Round corners on the shortest end.

Cut DESIGNER SERIES PAPER into a 5-1/8" x 1/4" strip.  Use STICKY STRIP to adhere to card stock.  

Using the 1/16" CIRCLE PUNCH, punch holes on the 1-1/2" score line at 1/4" from each end.  Cut a piece of 1/4" GROSGRAIN RIBBON to 7-1/2".  Thread through the holes to create the handle.

Use the 1/16" CIRCLE PUNCH to punch through sticker accent, and the front two layers of the purse.  Use SILVER BRAD to secure the purse layers together.  Use a piece of STICKY STRIP to secure a Hershey's nugget to the bottom of the purse.

MINI POST-IT NOTE KEY CHAIN

LARGE POST-IT NOTE COVER

INSTRUCTIONS~

Measure the notepad for dimensions.   I measured the height of the stack of notes and added just a little bit more length to adjust for the score lines.  I also added about 1/16" to each end to ensure the post it pad would be completely covered.  You can see on my larger notepad that a bit of the paper shows up because I didn't plan on the score lines taking away from the measurements.

ALTERED NOTEPAD

INSTRUCTIONS~

Measure notepad to be covered (make sure to measure the height of the notepad).  Apply STICKY STRIP to the edge and along the spine  on the front and back cover as well as applying a strip to the spine itself.  Starting on one edge, line up the DESIGNER SERIES PAPER with the edge and very carefully attach to the notepad.  Work your way to the other edge one line of STICKY STRIP at a time.  Using the opposite side of the DESIGNER SERIES PAPER  measure it to have an inch on each side of the notebook.  Use STICKY STRIP on each end and on the spine of the notebook.  I used the sticker accents from the I WISH SIMPLY SCRAPPIN' KIT to embellish.